2000-5000 LPH Milk Pasteurizer Plant
Automated 2000-5000 LPH HTST milk pasteurizer — PHE-based with flow diversion and heat recovery, designed, fabricated and commissioned by ATMAN as a complete FSSAI-ready system.
Get a 2000-5000 LPH QuoteSized for 2000-5000 LPH
High-throughput HTST lines for milk unions and mid-to-large plants running multiple products and shifts. Rated at 2000-5000 LPH (~20,000–50,000 litres per day at typical run hours), this ATMAN pasteurizer holds milk at 72°C for 15 seconds with automatic flow diversion and 90%+ regenerative heat recovery to cut running cost.
HTST with automated flow diversion
Plate heat exchanger, hot-water set, holding tube and automatic flow-diversion valve — full PLC control, CIP-ready, and integrated with your reception, storage and packing line.
2000-5000 LPH Specs
What the System Includes
Regenerative PHE
Plate pack with regeneration, heating and cooling sections for high heat recovery.
Holding Tube + FDV
Holding tube and automatic flow-diversion valve — the core FSSAI safety interlock.
Balance Tank & Pumps
Feed balance tank, timing/feed pumps and hot-water set.
PLC / HMI Controls
Automated temperature control, logging and CIP integration.
Why ATMAN at 2000-5000 LPH
90%+ Heat Recovery
Regenerative PHE slashes steam and chilling cost at this capacity.
Automated Flow Diversion
Under-temperature milk auto-diverted — FSSAI-required, built in.
In-House Automation
PLC/SCADA, logging and traceability from the plant builder itself.
Scales With You
Engineered to integrate with future line expansion and added products.
Global-Grade Components, Engineered Into One Line
Where the process demands it, ATMAN specifies and integrates critical components from world-leading brands (Alfa Laval, GEA, SPX / APV, Tetra Pak, IDMC), engineered into a single commissioned plant, not sold as loose parts.
Our Scope
Capacity & Product Study
Confirm 2000-5000 LPH suits your volume, run hours and product mix.
Process & Thermal Design
PHE sizing, holding-tube and heat-recovery calculation.
Fabrication (SS316L)
Skid, holding tube and piping in food-grade stainless steel.
Automation & Controls
PLC, HMI, flow diversion and CIP integration.
Install, Test & Commission
Erection, thermal validation and operator training.
Frequently Asked Questions
How much milk does a 2000-5000 LPH pasteurizer process per day?
Around ~20,000–50,000 litres per day depending on run hours and changeovers. ATMAN sizes the line to your actual shift pattern.
Who is a 2000-5000 LPH pasteurizer suitable for?
Best suited for mid-to-large plants and milk unions. We confirm the fit during the capacity study before quoting.
Does it include automatic flow diversion for FSSAI?
Yes. Automatic flow diversion of under-temperature milk is standard and integrated with PLC control, meeting FSSAI and food-safety requirements.
Can it integrate with CIP and my existing plant?
Yes. As an in-house process and automation house, we integrate the pasteurizer with CIP circuits and new or existing plant SCADA.