300 LPH Milk Pasteurizer Plant
Automated 300 LPH HTST milk pasteurizer — PHE-based with flow diversion and heat recovery, designed, fabricated and commissioned by ATMAN as a complete FSSAI-ready system.
Get a 300 LPH QuoteSized for 300 LPH
A compact skid-mounted HTST unit ideal for entrepreneurs entering dairy or captive processing at a farm/institution. Rated at 300 LPH (up to ~3,000 litres per day at typical run hours), this ATMAN pasteurizer holds milk at 72°C for 15 seconds with automatic flow diversion and 90%+ regenerative heat recovery to cut running cost.
HTST with automated flow diversion
Plate heat exchanger, hot-water set, holding tube and automatic flow-diversion valve — full PLC control, CIP-ready, and integrated with your reception, storage and packing line.
300 LPH Specs
What the System Includes
Regenerative PHE
Plate pack with regeneration, heating and cooling sections for high heat recovery.
Holding Tube + FDV
Holding tube and automatic flow-diversion valve — the core FSSAI safety interlock.
Balance Tank & Pumps
Feed balance tank, timing/feed pumps and hot-water set.
PLC / HMI Controls
Automated temperature control, logging and CIP integration.
Why ATMAN at 300 LPH
90%+ Heat Recovery
Regenerative PHE slashes steam and chilling cost at this capacity.
Automated Flow Diversion
Under-temperature milk auto-diverted — FSSAI-required, built in.
In-House Automation
PLC/SCADA, logging and traceability from the plant builder itself.
Scales With You
Engineered to integrate with future line expansion and added products.
Global-Grade Components, Engineered Into One Line
Where the process demands it, ATMAN specifies and integrates critical components from world-leading brands (Alfa Laval, GEA, SPX / APV, Tetra Pak, IDMC), engineered into a single commissioned plant, not sold as loose parts.
Our Scope
Capacity & Product Study
Confirm 300 LPH suits your volume, run hours and product mix.
Process & Thermal Design
PHE sizing, holding-tube and heat-recovery calculation.
Fabrication (SS316L)
Skid, holding tube and piping in food-grade stainless steel.
Automation & Controls
PLC, HMI, flow diversion and CIP integration.
Install, Test & Commission
Erection, thermal validation and operator training.
Frequently Asked Questions
How much milk does a 300 LPH pasteurizer process per day?
Around up to ~3,000 litres per day depending on run hours and changeovers. ATMAN sizes the line to your actual shift pattern.
Who is a 300 LPH pasteurizer suitable for?
Best suited for mini-dairies, startups, FPOs and captive dairies. We confirm the fit during the capacity study before quoting.
Does it include automatic flow diversion for FSSAI?
Yes. Automatic flow diversion of under-temperature milk is standard and integrated with PLC control, meeting FSSAI and food-safety requirements.
Can it integrate with CIP and my existing plant?
Yes. As an in-house process and automation house, we integrate the pasteurizer with CIP circuits and new or existing plant SCADA.