PLC, SCADA & Industrial Automation Services in Karnataka
ATMAN Group works across Karnataka on PLC and SCADA engineering, HMI and control panel engineering and supply, instrumentation, legacy PLC migration, AMC, Siemens spares and remote troubleshooting — for food and beverage, dairy, pharmaceutical, chemical, water treatment and distribution, and general process and manufacturing plants.
Discuss Your Requirement WhatsApp Our EngineersPrecision Engineering, Aerospace and a Fast-Growing Food Sector
Karnataka’s manufacturing sits in the Bengaluru ring — Peenya, Bommasandra, Jigani, Attibele, Dabaspet, Nelamangala, Hoskote and Harohalli — with Mysuru, Hubballi–Dharwad, Belagavi’s foundry cluster and the Hosur border belt beyond it.
Machine tools and precision engineering, aerospace and defence suppliers, electronics, pharmaceutical, and a dairy and food processing sector built on one of the strongest cooperative milk networks in the country. The automation demand is data and traceability at the top end, and machine retrofits and obsolescence migration everywhere else.
Automation Services We Deliver in Karnataka
Siemens First, All Makes Supported
Siemens is our core platform — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. Plants in Karnataka run on everything, so we also work on Allen-Bradley, Mitsubishi, Delta and other major makes: programming, modification, troubleshooting, upgrades and migration, either from another make to Siemens or within the same make. Siemens spares are supplied as part of project, AMC and service scope. We are not an authorised Siemens channel.
Legacy Systems, Obsolescence and Migration
Most of what we are called for in Karnataka is not a greenfield line. It is a working plant on hardware that is no longer procurable, with a programme nobody on site can edit and a SCADA on an operating system IT will not keep on the network. We survey what is installed, document the I/O and the logic, and stage the migration around your shutdown window instead of asking for the plant to stop.
Panel Engineering, Supply and Commissioning
Control philosophy, GA and wiring drawings, component selection, MCC, PLC and VFD panel engineering, supply, testing and site commissioning — taken together with the programme and the field instrumentation, so the panel, the logic and the loop sit with one team rather than three vendors pointing at each other.
AMC, Spares and Remote Troubleshooting
After handover the work continues as an annual maintenance contract: scheduled visits, backup and version control of programmes, Siemens spares holding advice, breakdown attendance, and remote PLC and SCADA troubleshooting that settles a large share of faults before an engineer travels.
Cities We Serve Across Karnataka
Bengaluru is our base of work in the state; Mysuru, Hubballi, Belagavi and the Hosur belt are covered from the same team.
How We Work Across Karnataka
Work is planned in blocks from Ahmedabad, with offline engineering, testing and simulation completed before travel so that site time is commissioning time. AMC clients get planned cycles plus remote PLC and SCADA troubleshooting between visits.
Discuss Your Automation Requirement in Karnataka
Tell us the platform in use, the plant and what you are trying to fix or build, and one of our engineers will come back with a scope and an indicative budget.
Frequently Asked Questions
Do you work on dairy plants in Karnataka?
Yes. Dairy process automation is a core capability and we have executed dairy work in Karnataka. Reception, chilling, pasteurisation, CIP, tank farm, packing and reporting are standard scope.
Can you retrofit machine tools whose builder no longer supports them?
Often yes. Where the mechanics are sound, replacing the drive, PLC and HMI layer and rebuilding the control logic is usually far cheaper than replacing the machine.
Do you work on makes other than Siemens?
Yes. Siemens is our core platform and our deepest expertise — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. We also program, modify, troubleshoot and upgrade Allen-Bradley, Mitsubishi, Delta and other major makes, and we handle migration from any make to Siemens or within the same make.
Do you supply the panels as well?
Yes. Panel engineering, supply and commissioning are part of our scope — control philosophy, GA and wiring drawings, component selection, testing and site commissioning — so the panel, the programme and the field instrumentation are answerable to one team.
Are you an authorised Siemens dealer?
No. We are not an authorised Siemens channel and do not claim to be. We supply Siemens spares and components as part of our project, AMC and service scope.
Can you take over a system somebody else installed?
Yes. Much of our work is on installed plant — undocumented programmes, obsolete hardware, SCADA nobody can edit. We start with a survey of what is actually running, document it, and then quote the modification, migration or AMC scope against that.