PLC, SCADA & Industrial Automation Services in Delhi NCR
ATMAN Group delivers PLC and SCADA engineering, HMI and control panel engineering and supply, instrumentation, legacy PLC migration, AMC, Siemens spares and remote troubleshooting to plants across Delhi NCR — every industry, not one sector.
Discuss Your Requirement WhatsApp Our EngineersThe Delhi NCR Belt We Work In
The NCR industrial belt runs from Bawana, Narela and Okhla inside Delhi out to Noida and Greater Noida, Ghaziabad and Sahibabad, Faridabad, and the Gurugram–Manesar corridor, with Bhiwadi and Neemrana just beyond.
Electronics and appliance assembly, auto components, pharmaceutical, food processing, printing and packaging, and a large base of job-work and supplier units. Line control, traceability, energy monitoring and obsolescence migration are the standing requirements; the constraint is usually that nothing can stop for long.
Automation Services We Deliver in Delhi NCR
Siemens First, All Makes Supported
Siemens is our core platform — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. Plants in Delhi NCR run on everything, so we also work on Allen-Bradley, Mitsubishi, Delta and other major makes: programming, modification, troubleshooting, upgrades and migration, either from another make to Siemens or within the same make. Siemens spares are supplied as part of project, AMC and service scope. We are not an authorised Siemens channel.
Legacy Systems, Obsolescence and Migration
Most of what we are called for in Delhi NCR is not a greenfield line. It is a working plant on hardware that is no longer procurable, with a programme nobody on site can edit and a SCADA on an operating system IT will not keep on the network. We survey what is installed, document the I/O and the logic, and stage the migration around your shutdown window instead of asking for the plant to stop.
Panel Engineering, Supply and Commissioning
Control philosophy, GA and wiring drawings, component selection, MCC, PLC and VFD panel engineering, supply, testing and site commissioning — taken together with the programme and the field instrumentation, so the panel, the logic and the loop sit with one team rather than three vendors pointing at each other.
AMC, Spares and Remote Troubleshooting
After handover the work continues as an annual maintenance contract: scheduled visits, backup and version control of programmes, Siemens spares holding advice, breakdown attendance, and remote PLC and SCADA troubleshooting that settles a large share of faults before an engineer travels.
How a Delhi NCR Assignment Runs
A site survey first, because quoting automation work off a description rather than the installed hardware is how scope disputes start. Then a written scope and an indicative budget, engineering and panel supply, installation and commissioning by our own engineers, documentation and operator handover, and an AMC offer once the plant is stable.
Discuss Your Automation Requirement in Delhi NCR
Tell us what is installed and what is failing, or what you are planning, and one of our engineers will come back to you with a scope and an indicative budget.
Frequently Asked Questions
Can you schedule work around a plant that runs continuously?
Yes. Conversion, testing and simulation are done offline, retrofit hardware is prepared in advance, and only the changeover, loop checks and start-up need the window — often a weekly off or a single night shift.
Do you cover Noida, Ghaziabad, Faridabad and Manesar as one belt?
Yes. NCR is scheduled as one territory, so survey and commissioning trips cover several sites where the calendar allows, with remote troubleshooting between visits.
How quickly can your engineers reach a site in Delhi NCR?
Our engineers travel from our Ahmedabad base. Survey visits in the NCR belt are scheduled within the week, commissioning is planned in blocks, and AMC clients get planned visit cycles with remote PLC and SCADA troubleshooting as first response between visits.
Do you work on makes other than Siemens?
Yes. Siemens is our core platform and our deepest expertise — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. We also program, modify, troubleshoot and upgrade Allen-Bradley, Mitsubishi, Delta and other major makes, and we handle migration from any make to Siemens or within the same make.
Do you supply the panels as well?
Yes. Panel engineering, supply and commissioning are part of our scope — control philosophy, GA and wiring drawings, component selection, testing and site commissioning — so the panel, the programme and the field instrumentation are answerable to one team.
Are you an authorised Siemens dealer?
No. We are not an authorised Siemens channel and do not claim to be. We supply Siemens spares and components as part of our project, AMC and service scope.