PLC, SCADA & Industrial Automation Services in Ahmedabad
ATMAN Group is an Ahmedabad-based automation project and service company — PLC and SCADA engineering, HMI and control panel engineering and supply, instrumentation, legacy PLC migration, AMC, Siemens spares and remote troubleshooting, for plants across every industry in the Ahmedabad belt.
Discuss Your Requirement WhatsApp Our EngineersThe Ahmedabad Belt We Work In
Ahmedabad is one of the densest industrial districts in western India, and the automation work sits in the estates around it rather than in the city itself — Sanand and Bol on the west, Changodar, Moraiya and Bavla on the Rajkot highway, Vatva, Narol, Odhav, Naroda and Kathwada on the east, Aslali and Kheda side on the south, and the Chhatral–Santej corridor running north toward Gandhinagar.
Those estates carry food and beverage plants, dairies, pharmaceutical and chemical units, textile processing, engineering and auto components, packaging, water treatment plants and municipal water distribution systems. Each of them runs on PLCs, drives, instrumentation and a SCADA somebody configured years ago — and most of the work we are called for is on plant that is already running, not on greenfield sites.
Automation Services We Deliver in Ahmedabad
Siemens First, All Makes Supported
Siemens is our core platform — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. Plants in this belt run on everything, so we also work on Allen-Bradley, Mitsubishi, Delta and other major makes: programming, modification, troubleshooting, upgrades and migration, either from another make to Siemens or within the same make. We supply Siemens spares as part of project, AMC and service scope. We are not an authorised Siemens channel.
Legacy Systems, Obsolescence and Migration
The most common problem we are called for in Ahmedabad is not a new plant — it is a working line on hardware that is no longer procurable, with a programme nobody in the plant can edit and a SCADA on an operating system that IT will not allow on the network. We survey what is installed, document the I/O and the logic, and then set out the migration in stages that fit your shutdown window rather than asking for the plant to stop.
Panel Engineering, Supply and Commissioning
Control philosophy, GA and wiring drawings, component selection, MCC, PLC and VFD panel engineering, supply, testing and site commissioning — taken together with the programme and the field instrumentation, so the panel, the logic and the loop are the responsibility of one team rather than three vendors pointing at each other.
AMC, Spares and Remote Troubleshooting
After handover the work continues as an annual maintenance contract: scheduled visits, backup and version control of programmes, Siemens spares holding advice, breakdown attendance, and remote PLC and SCADA troubleshooting that resolves a large share of faults without waiting for an engineer to travel.
How an Ahmedabad Assignment Runs
A site survey first, because quoting automation work off a description rather than the installed hardware is how scope disputes start. Then a written scope and an indicative budget, engineering and panel supply, site installation and commissioning by our own engineers, documentation and operator handover, and an AMC offer once the plant is stable.
Discuss Your Automation Requirement in Ahmedabad
Tell us what is installed and what is failing, or what you are planning, and one of our engineers will come back to you with a scope and an indicative budget.
Frequently Asked Questions
Do you work on makes other than Siemens?
Yes. Siemens is our core platform and our deepest expertise — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. We also program, modify, troubleshoot and upgrade Allen-Bradley, Mitsubishi, Delta and other major makes, and we handle migration from any make to Siemens or within the same make.
Do you supply the panels as well?
Yes. Panel engineering, supply and commissioning are part of our scope — control philosophy, GA and wiring drawings, component selection, testing and site commissioning — so the panel, the programme and the field instrumentation are answerable to one team.
Are you an authorised Siemens dealer?
No. We are not an authorised Siemens channel and do not claim to be. We supply Siemens spares and components as part of our project, AMC and service scope.
How quickly can your engineers reach a site in Ahmedabad?
Our engineering base is in Ahmedabad, so a site visit within the city and the surrounding belt — Sanand, Changodar, Bavla, Vatva, Naroda, Odhav, Narol, Kathwada, Chhatral — is usually the same day or the next working day.
Can you take over a system somebody else installed?
Yes. Much of our work is on installed plant — undocumented programmes, obsolete hardware, SCADA nobody can edit. We start with a survey of what is actually running, document it, and then quote the modification, migration or AMC scope against that.
Do you offer remote support, or only site visits?
Both. Remote PLC and SCADA troubleshooting is a standing service for our clients and resolves a large share of faults without a site visit; where the fault is electrical, mechanical or in the field wiring, our engineers attend site.