PLC, SCADA & Industrial Automation Services in Nashik
ATMAN Group delivers PLC and SCADA engineering, HMI and control panel engineering and supply, instrumentation, legacy PLC migration, AMC, Siemens spares and remote troubleshooting to plants across Nashik — every industry, not one sector.
Discuss Your Requirement WhatsApp Our EngineersThe Nashik Belt We Work In
Nashik works out of Satpur and Ambad MIDC inside the city and Sinnar, Dindori and Igatpuri around it — engineering and auto components, electrical equipment, pharmaceutical, plastics and packaging, and a large food, wine and agro-processing sector built on the district’s horticulture.
Food and beverage plants here need hygienic control design, CIP sequencing, batching and cold-chain monitoring; the engineering units need drive control, machine data and utility monitoring. Both run into the same problem after a decade — hardware that cannot be bought and a programme nobody can read.
Automation Services We Deliver in Nashik
Siemens First, All Makes Supported
Siemens is our core platform — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. Plants in Nashik run on everything, so we also work on Allen-Bradley, Mitsubishi, Delta and other major makes: programming, modification, troubleshooting, upgrades and migration, either from another make to Siemens or within the same make. Siemens spares are supplied as part of project, AMC and service scope. We are not an authorised Siemens channel.
Legacy Systems, Obsolescence and Migration
Most of what we are called for in Nashik is not a greenfield line. It is a working plant on hardware that is no longer procurable, with a programme nobody on site can edit and a SCADA on an operating system IT will not keep on the network. We survey what is installed, document the I/O and the logic, and stage the migration around your shutdown window instead of asking for the plant to stop.
Panel Engineering, Supply and Commissioning
Control philosophy, GA and wiring drawings, component selection, MCC, PLC and VFD panel engineering, supply, testing and site commissioning — taken together with the programme and the field instrumentation, so the panel, the logic and the loop sit with one team rather than three vendors pointing at each other.
AMC, Spares and Remote Troubleshooting
After handover the work continues as an annual maintenance contract: scheduled visits, backup and version control of programmes, Siemens spares holding advice, breakdown attendance, and remote PLC and SCADA troubleshooting that settles a large share of faults before an engineer travels.
How a Nashik Assignment Runs
A site survey first, because quoting automation work off a description rather than the installed hardware is how scope disputes start. Then a written scope and an indicative budget, engineering and panel supply, installation and commissioning by our own engineers, documentation and operator handover, and an AMC offer once the plant is stable.
Discuss Your Automation Requirement in Nashik
Tell us what is installed and what is failing, or what you are planning, and one of our engineers will come back to you with a scope and an indicative budget.
Frequently Asked Questions
Do you engineer CIP and hygienic process control?
Yes. CIP circuits and sequencing, valve matrices, temperature and conductivity control, and the recording that proves the cycle ran are part of our process control work in food, beverage and dairy plants.
Can you handle cold storage and utility monitoring?
Yes. Refrigeration plant interlocks, temperature and humidity monitoring with alarms and logs, compressed air and boiler monitoring, and energy metering across the utilities are commonly taken together with the process scope.
How quickly can your engineers reach a site in Nashik?
Our engineers travel from our Ahmedabad base. Survey visits in Nashik are scheduled within the week, commissioning is planned in blocks, and AMC clients get planned visit cycles with remote PLC and SCADA troubleshooting as first response between visits.
Do you work on makes other than Siemens?
Yes. Siemens is our core platform and our deepest expertise — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. We also program, modify, troubleshoot and upgrade Allen-Bradley, Mitsubishi, Delta and other major makes, and we handle migration from any make to Siemens or within the same make.
Do you supply the panels as well?
Yes. Panel engineering, supply and commissioning are part of our scope — control philosophy, GA and wiring drawings, component selection, testing and site commissioning — so the panel, the programme and the field instrumentation are answerable to one team.
Are you an authorised Siemens dealer?
No. We are not an authorised Siemens channel and do not claim to be. We supply Siemens spares and components as part of our project, AMC and service scope.