PLC, SCADA & Industrial Automation Services in Surat
ATMAN Group delivers PLC and SCADA engineering, HMI and control panel engineering and supply, instrumentation, legacy PLC migration, AMC, Siemens spares and remote troubleshooting to plants across Surat — every industry, not one sector.
Discuss Your Requirement WhatsApp Our EngineersThe Surat Belt We Work In
Surat runs on three industrial engines at once: textile processing and dyeing at Pandesara, Sachin and Palsana; petrochemicals and heavy process plant at Hazira; and diamond, packaging, engineering and food units spread through Katargam, Udhna and the Kim–Kosamba belt.
Dyeing and processing houses need recipe-driven batch control, steam and thermic fluid monitoring and effluent compliance data; the Hazira side needs continuous process control and instrumentation discipline. Both need utility and energy monitoring, because power and steam are the largest controllable cost in the city.
Automation Services We Deliver in Surat
Siemens First, All Makes Supported
Siemens is our core platform — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. Plants in Surat run on everything, so we also work on Allen-Bradley, Mitsubishi, Delta and other major makes: programming, modification, troubleshooting, upgrades and migration, either from another make to Siemens or within the same make. Siemens spares are supplied as part of project, AMC and service scope. We are not an authorised Siemens channel.
Legacy Systems, Obsolescence and Migration
Most of what we are called for in Surat is not a greenfield line. It is a working plant on hardware that is no longer procurable, with a programme nobody on site can edit and a SCADA on an operating system IT will not keep on the network. We survey what is installed, document the I/O and the logic, and stage the migration around your shutdown window instead of asking for the plant to stop.
Panel Engineering, Supply and Commissioning
Control philosophy, GA and wiring drawings, component selection, MCC, PLC and VFD panel engineering, supply, testing and site commissioning — taken together with the programme and the field instrumentation, so the panel, the logic and the loop sit with one team rather than three vendors pointing at each other.
AMC, Spares and Remote Troubleshooting
After handover the work continues as an annual maintenance contract: scheduled visits, backup and version control of programmes, Siemens spares holding advice, breakdown attendance, and remote PLC and SCADA troubleshooting that settles a large share of faults before an engineer travels.
How a Surat Assignment Runs
A site survey first, because quoting automation work off a description rather than the installed hardware is how scope disputes start. Then a written scope and an indicative budget, engineering and panel supply, installation and commissioning by our own engineers, documentation and operator handover, and an AMC offer once the plant is stable.
Discuss Your Automation Requirement in Surat
Tell us what is installed and what is failing, or what you are planning, and one of our engineers will come back to you with a scope and an indicative budget.
Frequently Asked Questions
Do you handle effluent and utility monitoring for processing houses?
Yes. Flow, pH, TDS and level instrumentation, pump and blower control, dosing sequences and continuous data logging for compliance reporting are a regular part of our scope, alongside boiler, thermic fluid and compressed-air monitoring.
Can you automate a dyeing or processing line that is presently run manually?
Yes, in stages. Usually we start with the utility and safety interlocks, then recipe-driven sequencing on one line as a pilot, and extend only after the first line has run a full season and the operators trust it.
How quickly can your engineers reach a site in Surat?
Surat is around four hours from Ahmedabad. We schedule survey visits within the week and hold planned visit cycles for AMC clients, with remote troubleshooting in between.
Do you work on makes other than Siemens?
Yes. Siemens is our core platform and our deepest expertise — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. We also program, modify, troubleshoot and upgrade Allen-Bradley, Mitsubishi, Delta and other major makes, and we handle migration from any make to Siemens or within the same make.
Do you supply the panels as well?
Yes. Panel engineering, supply and commissioning are part of our scope — control philosophy, GA and wiring drawings, component selection, testing and site commissioning — so the panel, the programme and the field instrumentation are answerable to one team.
Are you an authorised Siemens dealer?
No. We are not an authorised Siemens channel and do not claim to be. We supply Siemens spares and components as part of our project, AMC and service scope.