PLC, SCADA & Industrial Automation Services in Silvassa
ATMAN Group delivers PLC and SCADA engineering, HMI and control panel engineering and supply, instrumentation, legacy PLC migration, AMC, Siemens spares and remote troubleshooting to plants across Silvassa — every industry, not one sector.
Discuss Your Requirement WhatsApp Our EngineersThe Silvassa Belt We Work In
Silvassa and the Dadra & Nagar Haveli estates — Masat, Piparia, Khadoli and Dadra — carry one of the densest factory concentrations in western India: plastics and polymer processing, textiles, pharmaceutical, packaging, engineering and food units, many running three shifts.
Most plants here are mid-sized and run hard, which makes uptime the governing requirement. The common assignments are drive and machine control retrofits, plant-wide SCADA over machines from several makes, utility and energy monitoring, and AMC that keeps a spares position for the critical items.
Automation Services We Deliver in Silvassa
Siemens First, All Makes Supported
Siemens is our core platform — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. Plants in Silvassa run on everything, so we also work on Allen-Bradley, Mitsubishi, Delta and other major makes: programming, modification, troubleshooting, upgrades and migration, either from another make to Siemens or within the same make. Siemens spares are supplied as part of project, AMC and service scope. We are not an authorised Siemens channel.
Legacy Systems, Obsolescence and Migration
Most of what we are called for in Silvassa is not a greenfield line. It is a working plant on hardware that is no longer procurable, with a programme nobody on site can edit and a SCADA on an operating system IT will not keep on the network. We survey what is installed, document the I/O and the logic, and stage the migration around your shutdown window instead of asking for the plant to stop.
Panel Engineering, Supply and Commissioning
Control philosophy, GA and wiring drawings, component selection, MCC, PLC and VFD panel engineering, supply, testing and site commissioning — taken together with the programme and the field instrumentation, so the panel, the logic and the loop sit with one team rather than three vendors pointing at each other.
AMC, Spares and Remote Troubleshooting
After handover the work continues as an annual maintenance contract: scheduled visits, backup and version control of programmes, Siemens spares holding advice, breakdown attendance, and remote PLC and SCADA troubleshooting that settles a large share of faults before an engineer travels.
How a Silvassa Assignment Runs
A site survey first, because quoting automation work off a description rather than the installed hardware is how scope disputes start. Then a written scope and an indicative budget, engineering and panel supply, installation and commissioning by our own engineers, documentation and operator handover, and an AMC offer once the plant is stable.
Discuss Your Automation Requirement in Silvassa
Tell us what is installed and what is failing, or what you are planning, and one of our engineers will come back to you with a scope and an indicative budget.
Frequently Asked Questions
Can you bring machines from different makes into one SCADA?
Yes. That is the most common request in this belt. We read from each controller over the protocol it supports, normalise the tags, and present one plant view with production, downtime and energy, without replacing working machine controls.
What does an AMC cover for a three-shift plant?
Scheduled preventive visits, programme backups and version control, an agreed response commitment for breakdowns, remote troubleshooting as first response, and advice on the Siemens spares worth holding on site so a failure does not become a shift loss.
How quickly can your engineers reach a site in Silvassa?
Silvassa sits next to Vapi, around four and a half hours from Ahmedabad. We schedule survey visits across the Vapi–Silvassa–Daman belt together, with remote troubleshooting between visits.
Do you work on makes other than Siemens?
Yes. Siemens is our core platform and our deepest expertise — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. We also program, modify, troubleshoot and upgrade Allen-Bradley, Mitsubishi, Delta and other major makes, and we handle migration from any make to Siemens or within the same make.
Do you supply the panels as well?
Yes. Panel engineering, supply and commissioning are part of our scope — control philosophy, GA and wiring drawings, component selection, testing and site commissioning — so the panel, the programme and the field instrumentation are answerable to one team.
Are you an authorised Siemens dealer?
No. We are not an authorised Siemens channel and do not claim to be. We supply Siemens spares and components as part of our project, AMC and service scope.