PLC, SCADA & Industrial Automation Services in Vadodara
ATMAN Group delivers PLC and SCADA engineering, HMI and control panel engineering and supply, instrumentation, legacy PLC migration, AMC, Siemens spares and remote troubleshooting to plants across Vadodara — every industry, not one sector.
Discuss Your Requirement WhatsApp Our EngineersThe Vadodara Belt We Work In
Vadodara is the chemical and heavy-engineering capital of Gujarat. The plants sit at Nandesari, Makarpura, Por and Ramangamdi, Savli, Dabhoi Road and out toward Halol — petrochemicals, dyes and intermediates, pharmaceutical, heavy electrical and transformer works, plastics, packaging and auto components.
Process plants here run continuous, with hazardous-area classification, batch recipes and effluent treatment all under the same control philosophy. That makes documentation, alarm rationalisation and traceability as much a part of the automation scope as the logic itself.
Automation Services We Deliver in Vadodara
Siemens First, All Makes Supported
Siemens is our core platform — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. Plants in Vadodara run on everything, so we also work on Allen-Bradley, Mitsubishi, Delta and other major makes: programming, modification, troubleshooting, upgrades and migration, either from another make to Siemens or within the same make. Siemens spares are supplied as part of project, AMC and service scope. We are not an authorised Siemens channel.
Legacy Systems, Obsolescence and Migration
Most of what we are called for in Vadodara is not a greenfield line. It is a working plant on hardware that is no longer procurable, with a programme nobody on site can edit and a SCADA on an operating system IT will not keep on the network. We survey what is installed, document the I/O and the logic, and stage the migration around your shutdown window instead of asking for the plant to stop.
Panel Engineering, Supply and Commissioning
Control philosophy, GA and wiring drawings, component selection, MCC, PLC and VFD panel engineering, supply, testing and site commissioning — taken together with the programme and the field instrumentation, so the panel, the logic and the loop sit with one team rather than three vendors pointing at each other.
AMC, Spares and Remote Troubleshooting
After handover the work continues as an annual maintenance contract: scheduled visits, backup and version control of programmes, Siemens spares holding advice, breakdown attendance, and remote PLC and SCADA troubleshooting that settles a large share of faults before an engineer travels.
How a Vadodara Assignment Runs
A site survey first, because quoting automation work off a description rather than the installed hardware is how scope disputes start. Then a written scope and an indicative budget, engineering and panel supply, installation and commissioning by our own engineers, documentation and operator handover, and an AMC offer once the plant is stable.
Discuss Your Automation Requirement in Vadodara
Tell us what is installed and what is failing, or what you are planning, and one of our engineers will come back to you with a scope and an indicative budget.
Frequently Asked Questions
Do you work on batch process control and recipe handling?
Yes. Batch sequencing, recipe management, material tracking and batch reporting are a regular part of our SCADA and PLC scope for chemical, pharmaceutical and food plants, built so that a recipe change is an operator action rather than a programming job.
Can you engineer controls for hazardous-area sections?
We engineer the control and instrumentation scope to the area classification given in your HAZOP and layout — certified field devices, correct barriers and isolation, and panels located and specified accordingly. The classification itself comes from your process safety documentation.
How quickly can your engineers reach a site in Vadodara?
Vadodara is under two hours from our Ahmedabad base on the expressway, so survey visits and breakdown attendance are usually same day or next working day.
Do you work on makes other than Siemens?
Yes. Siemens is our core platform and our deepest expertise — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. We also program, modify, troubleshoot and upgrade Allen-Bradley, Mitsubishi, Delta and other major makes, and we handle migration from any make to Siemens or within the same make.
Do you supply the panels as well?
Yes. Panel engineering, supply and commissioning are part of our scope — control philosophy, GA and wiring drawings, component selection, testing and site commissioning — so the panel, the programme and the field instrumentation are answerable to one team.
Are you an authorised Siemens dealer?
No. We are not an authorised Siemens channel and do not claim to be. We supply Siemens spares and components as part of our project, AMC and service scope.