PLC, SCADA & Industrial Automation Services in Jamnagar
ATMAN Group delivers PLC and SCADA engineering, HMI and control panel engineering and supply, instrumentation, legacy PLC migration, AMC, Siemens spares and remote troubleshooting to plants across Jamnagar — every industry, not one sector.
Discuss Your Requirement WhatsApp Our EngineersThe Jamnagar Belt We Work In
Jamnagar is two industries in one district: the brass-parts cluster at Dared, Shankar Tekri and the surrounding units, and the refinery and petrochemical belt toward Motikhavdi and Sikka with its long chain of service, fabrication and utility contractors.
The brass units are small, power-hungry and machine-dense, where drive control, energy monitoring and simple machine data pay back quickly. The refinery-side work is instrumentation discipline — loop integrity, documentation, calibration records and interfacing to systems that were specified by somebody else.
Automation Services We Deliver in Jamnagar
Siemens First, All Makes Supported
Siemens is our core platform — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. Plants in Jamnagar run on everything, so we also work on Allen-Bradley, Mitsubishi, Delta and other major makes: programming, modification, troubleshooting, upgrades and migration, either from another make to Siemens or within the same make. Siemens spares are supplied as part of project, AMC and service scope. We are not an authorised Siemens channel.
Legacy Systems, Obsolescence and Migration
Most of what we are called for in Jamnagar is not a greenfield line. It is a working plant on hardware that is no longer procurable, with a programme nobody on site can edit and a SCADA on an operating system IT will not keep on the network. We survey what is installed, document the I/O and the logic, and stage the migration around your shutdown window instead of asking for the plant to stop.
Panel Engineering, Supply and Commissioning
Control philosophy, GA and wiring drawings, component selection, MCC, PLC and VFD panel engineering, supply, testing and site commissioning — taken together with the programme and the field instrumentation, so the panel, the logic and the loop sit with one team rather than three vendors pointing at each other.
AMC, Spares and Remote Troubleshooting
After handover the work continues as an annual maintenance contract: scheduled visits, backup and version control of programmes, Siemens spares holding advice, breakdown attendance, and remote PLC and SCADA troubleshooting that settles a large share of faults before an engineer travels.
How a Jamnagar Assignment Runs
A site survey first, because quoting automation work off a description rather than the installed hardware is how scope disputes start. Then a written scope and an indicative budget, engineering and panel supply, installation and commissioning by our own engineers, documentation and operator handover, and an AMC offer once the plant is stable.
Discuss Your Automation Requirement in Jamnagar
Tell us what is installed and what is failing, or what you are planning, and one of our engineers will come back to you with a scope and an indicative budget.
Frequently Asked Questions
Do you take small-unit work, or only full plants?
Both. A single machine panel, a drive replacement or an energy-monitoring installation is worth doing properly, and in this belt it is often how a longer relationship starts.
Can you interface with a control system specified by a large EPC contractor?
Yes. We work to the document set that already exists — P&IDs, loop drawings, cause-and-effect and I/O schedules — and hand back the same document set updated, rather than leaving an undocumented change in somebody else’s system.
How quickly can your engineers reach a site in Jamnagar?
Jamnagar is about five hours from Ahmedabad. We plan survey visits and commissioning in blocks rather than single days, with remote troubleshooting and scheduled AMC visits in between.
Do you work on makes other than Siemens?
Yes. Siemens is our core platform and our deepest expertise — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. We also program, modify, troubleshoot and upgrade Allen-Bradley, Mitsubishi, Delta and other major makes, and we handle migration from any make to Siemens or within the same make.
Do you supply the panels as well?
Yes. Panel engineering, supply and commissioning are part of our scope — control philosophy, GA and wiring drawings, component selection, testing and site commissioning — so the panel, the programme and the field instrumentation are answerable to one team.
Are you an authorised Siemens dealer?
No. We are not an authorised Siemens channel and do not claim to be. We supply Siemens spares and components as part of our project, AMC and service scope.