PLC, SCADA & Industrial Automation Services in Rajkot
ATMAN Group delivers PLC and SCADA engineering, HMI and control panel engineering and supply, instrumentation, legacy PLC migration, AMC, Siemens spares and remote troubleshooting to plants across Rajkot — every industry, not one sector.
Discuss Your Requirement WhatsApp Our EngineersThe Rajkot Belt We Work In
Rajkot is the engineering heart of Saurashtra — Aji and Bhaktinagar estates in the city, Metoda GIDC, Shapar–Veraval and Lodhika on the outskirts. Castings and forgings, diesel engines, pumps, bearings, machine tools, auto components, kitchenware and food processing all sit within half an hour of each other.
Most units here grew from job-work shops into serious manufacturers, and their automation grew the same way: a drive here, a PLC there, three makes on one shop floor and no common SCADA. Consolidating that into one monitored system, with energy and production data coming off the machines, is the work we are most often asked for.
Automation Services We Deliver in Rajkot
Siemens First, All Makes Supported
Siemens is our core platform — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. Plants in Rajkot run on everything, so we also work on Allen-Bradley, Mitsubishi, Delta and other major makes: programming, modification, troubleshooting, upgrades and migration, either from another make to Siemens or within the same make. Siemens spares are supplied as part of project, AMC and service scope. We are not an authorised Siemens channel.
Legacy Systems, Obsolescence and Migration
Most of what we are called for in Rajkot is not a greenfield line. It is a working plant on hardware that is no longer procurable, with a programme nobody on site can edit and a SCADA on an operating system IT will not keep on the network. We survey what is installed, document the I/O and the logic, and stage the migration around your shutdown window instead of asking for the plant to stop.
Panel Engineering, Supply and Commissioning
Control philosophy, GA and wiring drawings, component selection, MCC, PLC and VFD panel engineering, supply, testing and site commissioning — taken together with the programme and the field instrumentation, so the panel, the logic and the loop sit with one team rather than three vendors pointing at each other.
AMC, Spares and Remote Troubleshooting
After handover the work continues as an annual maintenance contract: scheduled visits, backup and version control of programmes, Siemens spares holding advice, breakdown attendance, and remote PLC and SCADA troubleshooting that settles a large share of faults before an engineer travels.
How a Rajkot Assignment Runs
A site survey first, because quoting automation work off a description rather than the installed hardware is how scope disputes start. Then a written scope and an indicative budget, engineering and panel supply, installation and commissioning by our own engineers, documentation and operator handover, and an AMC offer once the plant is stable.
Discuss Your Automation Requirement in Rajkot
Tell us what is installed and what is failing, or what you are planning, and one of our engineers will come back to you with a scope and an indicative budget.
Frequently Asked Questions
Can you connect older machines that have no PLC at all?
Often yes. Where a machine has no controller, we add an I/O node and the instrumentation needed to read the few signals that matter — run status, cycle count, energy, temperature — and bring it into the same SCADA as the newer machines, without disturbing the machine controls.
Do you do energy and production monitoring for a whole shop floor?
Yes. Machine-level energy metering, production counting and downtime capture into a plant dashboard is a common scope here, and it is usually the fastest-paying automation work a manufacturing unit can do.
How quickly can your engineers reach a site in Rajkot?
Rajkot is about three and a half hours from Ahmedabad by road. Survey visits are scheduled within the week, and AMC clients get planned visit cycles plus remote troubleshooting between visits.
Do you work on makes other than Siemens?
Yes. Siemens is our core platform and our deepest expertise — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. We also program, modify, troubleshoot and upgrade Allen-Bradley, Mitsubishi, Delta and other major makes, and we handle migration from any make to Siemens or within the same make.
Do you supply the panels as well?
Yes. Panel engineering, supply and commissioning are part of our scope — control philosophy, GA and wiring drawings, component selection, testing and site commissioning — so the panel, the programme and the field instrumentation are answerable to one team.
Are you an authorised Siemens dealer?
No. We are not an authorised Siemens channel and do not claim to be. We supply Siemens spares and components as part of our project, AMC and service scope.