PLC, SCADA & Industrial Automation Services in Gujarat
ATMAN Group works across Gujarat on PLC and SCADA engineering, HMI and control panel engineering and supply, instrumentation, legacy PLC migration, AMC, Siemens spares and remote troubleshooting — for food and beverage, dairy, pharmaceutical, chemical, water treatment and distribution, and general process and manufacturing plants.
Discuss Your Requirement WhatsApp Our EngineersThe Most Densely Industrialised State in India
Gujarat runs on the GIDC network, and the automation demand follows it: the Ahmedabad–Sanand–Changodar belt, the Vadodara chemical and heavy-engineering cluster at Nandesari, Savli and Por, the Surat–Hazira textile and petrochemical corridor, Vapi and Sarigam in the south, and the Saurashtra engineering, ceramic and brass clusters at Rajkot, Morbi and Jamnagar. Kutch, Bharuch, Dahej and Ankleshwar add heavy process plant on top.
ATMAN Group is based in Ahmedabad, so Gujarat is home ground. We work across food and beverage, dairy, pharmaceutical, chemical, ceramic, textile processing, engineering, water treatment plants and water distribution systems — on new lines, on retrofits, and on plants whose control systems have outlived their spares.
Automation Services We Deliver in Gujarat
Siemens First, All Makes Supported
Siemens is our core platform — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. Plants in Gujarat run on everything, so we also work on Allen-Bradley, Mitsubishi, Delta and other major makes: programming, modification, troubleshooting, upgrades and migration, either from another make to Siemens or within the same make. Siemens spares are supplied as part of project, AMC and service scope. We are not an authorised Siemens channel.
Legacy Systems, Obsolescence and Migration
Most of what we are called for in Gujarat is not a greenfield line. It is a working plant on hardware that is no longer procurable, with a programme nobody on site can edit and a SCADA on an operating system IT will not keep on the network. We survey what is installed, document the I/O and the logic, and stage the migration around your shutdown window instead of asking for the plant to stop.
Panel Engineering, Supply and Commissioning
Control philosophy, GA and wiring drawings, component selection, MCC, PLC and VFD panel engineering, supply, testing and site commissioning — taken together with the programme and the field instrumentation, so the panel, the logic and the loop sit with one team rather than three vendors pointing at each other.
AMC, Spares and Remote Troubleshooting
After handover the work continues as an annual maintenance contract: scheduled visits, backup and version control of programmes, Siemens spares holding advice, breakdown attendance, and remote PLC and SCADA troubleshooting that settles a large share of faults before an engineer travels.
Cities We Serve Across Gujarat
Each city page below sets out the estates, the industries and the kind of automation work that belt actually asks for.
How We Work Across Gujarat
From Ahmedabad, most of Gujarat is a same-day or next-day site visit, which is why our Gujarat clients treat us as a service partner rather than a project vendor. Survey first, written scope, engineering and panel supply, commissioning by our own engineers, then an AMC with remote troubleshooting as the first response to any breakdown.
Discuss Your Automation Requirement in Gujarat
Tell us the platform in use, the plant and what you are trying to fix or build, and one of our engineers will come back with a scope and an indicative budget.
Frequently Asked Questions
Which industries do you cover in Gujarat?
Food and beverage, dairy, pharmaceutical, chemical and petrochemical, ceramic, textile processing, engineering and auto components, packaging, water treatment plants and water distribution systems. Automation and HVAC work is not restricted to any one sector.
Do you work outside the major cities?
Yes. The GIDC estates in smaller towns — Halol, Ankleshwar, Dahej, Sarigam, Kadi, Kalol, Shapar, Wankaner — are covered from the same team as the nearest city.
Do you work on makes other than Siemens?
Yes. Siemens is our core platform and our deepest expertise — S7-1200 and S7-1500, legacy S7-300 and S7-400, TIA Portal, STEP 7, WinCC and WinCC Unified. We also program, modify, troubleshoot and upgrade Allen-Bradley, Mitsubishi, Delta and other major makes, and we handle migration from any make to Siemens or within the same make.
Do you supply the panels as well?
Yes. Panel engineering, supply and commissioning are part of our scope — control philosophy, GA and wiring drawings, component selection, testing and site commissioning — so the panel, the programme and the field instrumentation are answerable to one team.
Are you an authorised Siemens dealer?
No. We are not an authorised Siemens channel and do not claim to be. We supply Siemens spares and components as part of our project, AMC and service scope.
Can you take over a system somebody else installed?
Yes. Much of our work is on installed plant — undocumented programmes, obsolete hardware, SCADA nobody can edit. We start with a survey of what is actually running, document it, and then quote the modification, migration or AMC scope against that.